VERTICAL AND HORIZONTAL METAMORPHOPSIA ONE YEAR AFTER SURGERY FOR MACULAR HOLES ≤ 500 µ m WITH AND WITHOUT INVERTED INTERNAL LIMITING MEMBRANE FLAP.

PURPOSE: To investigate the effect of an inverted internal limiting membrane flap (IF) and other factors on metamorphopsia after macular hole surgery. METHODS: Prospective case series of patients undergoing pars plana vitrectomy with gas tamponade, with either conventional internal limiting membrane peeling (CP) or an IF, for primary idiopathic macular holes ≤ 500 µ m. Vertical and horizontal metamorphopsia were measured as M-scores (degrees) using M-charts preoperatively and at 2, 6, and 12 months postoperatively. RESULTS: Fifty-three eyes of 53 patients were included of whom 27 underwent CP and 26 were treated with an IF. After macular hole surgery, all patients were pseudophakic. Vertical and horizontal metamorphopsia improved from 1.08 (±0.51) and 0.98 (±0.70) preoperatively to 0.58 (±0.37) and 0.45 (±0.36) at 2 months ( P < 0.01), with no further significant improvement at 6 months (0.39 [±0.31], P = 0.07 and 0.31 [±0.28], P = 0.18) or at 12 months (0.37 [±0.30], P = 0.72 and 0.28 [±0.28], P = 0.99). There was no significant difference in the mean vertical and horizontal metamorphopsia between patients with CP and with an IF at 2 months ( P = 0.063, P = 0.10), 6 months ( P = 0.25, P = 0.16), or 12 months ( P = 0.62, P = 0.22). Preoperative vertical M-score improved at 12 months after macular hole surgery by 61% and 64% in the CP and IF groups, respectively ( P = 0.84), and the horizontal M-score by 65% and 71%, respectively ( P = 0.98). CONCLUSION: The use of an IF has no evident bearing on the degree of postoperative metamorphopsia 12 months after surgical repair of macular holes ≤ 500 µ m.

INFLUENCE OF PREOPERATIVE POSTURING ON SUBFOVEAL FLUID HEIGHT IN MACULA-OFF RETINAL DETACHMENTS.

PURPOSE: To evaluate the effect of preoperative posturing on subfoveal fluid height (SFFH) in macula-off retinal detachment. METHODS: A prospective study including patients with macula-off retinal detachment with SFFH measurable on optical coherence tomography (OCT) and duration of loss of central vision (LCV) ≤ 7 days. Linear OCT volume scans were performed at baseline, after 1 minute, 1 hour, 4 hours, and on the next morning. For the first hour, all patients remained in an upright position. Patients were then either instructed to posture until the surgery according to the location of the primary retinal break (posturing group) or were not given any instructions (control group). RESULTS: Twenty-four patients were included in the posturing group and 11 patients in the control group. There was no significant change in SFFH between baseline, 1 minute, 1 hour, and 4 hours. The mean SFFH in the control group increased by 243 µ m from 624 (±268) µ m at baseline to 867 (±303) µ m the next morning ( P < 0.01) but decreased in the posturing group by 150 µ m from 728 (±416) to 578 (±445) µ m ( P = 0.03). There was a significant association of the SFFH the next morning with posturing ( P < 0.01) and SFFH at baseline ( P < 0.01), but not with location of primary break ( P = 0.20). The change in SFFH from baseline to the next morning was significantly associated with posturing and primary break location ( P < 0.01), but not with SFFH at baseline ( P = 0.21). CONCLUSION: Preoperative posturing is an effective measure to prevent progression of macular detachment in macula-off retinal detachment.

Importance of subfoveal fluid height on visual outcome in macula-off retinal detachments.

AIMS: To investigate the effect of subfoveal fluid height (SFFH) on visual outcome after macula-off retinal detachment (RD) repair. METHODS: Prospective interventional case series of consecutive patients undergoing pars plana vitrectomy with gas tamponade (PPV) for primary macula-off RD with duration of symptomatic loss of central vision (LCV) of ≤1 week. Preoperative SFFH was measured on two occasions an hour apart using optical coherence tomography (OCT) by two independent observers. Postoperative best corrected visual acuity (BCVA) was measured at 3 months. RESULTS: Sixty-one patients were included. All patients were pseudophakic after RD repair. The mean preoperative and postoperative BCVA (logarithm of the minimum angle of resolution) at 3 months was 1.41 (±0.71) and 0.15 (±0.12, range 0.00-0.70). Twenty-six patients with SFFH of ≤1500 µm were available for repeat OCT measurements. The variation in SFFH was proportional to the SFFH and showed a logarithmic (base 2) association (r=0.50, p=0.01). Patients were therefore grouped according to their SFFH as group 1: 1-100 µm, group 2: 101-300 µm, group 3: 301-700 µm, group 4: 701-1500 µm and group 5: 1501-3100 µm. BCVA at 3 months significantly reduced with increasing SFFH from 0.04 (±0.03) in group 1 to 0.28 (±0.15) in group 5 (p<0.001) but was not associated with age (p=0.77), preoperative BCVA (p=0.39), duration of LCV (p=0.63) or use of perfluorocarbon liquids (p=0.88). Forty-five patients had SFFH ≤1500 µm and achieved 0.10 (±0.07, range 0.00-0.30) logMAR. CONCLUSION: Visual acuity following PPV for macula-off RD is related to preoperative SFFH regardless of the duration of symptomatic LCV within the first week.

A Tool for High-Resolution Volumetric Optical Coherence Tomography by Compounding Radial-and Linear Acquired B-Scans Using Registration.

Optical coherence tomography (OCT) is a medical imaging modality that is commonly used to diagnose retinal diseases. In recent years, linear and radial scanning patterns have been proposed to acquire three-dimensional OCT data. These patterns show differences in A-scan acquisition density across the generated volumes, and thus differ in their suitability for the diagnosis of retinal diseases. While radial OCT volumes exhibit a higher A-scan sampling rate around the scan center, linear scans contain more information in the peripheral scan areas. In this paper, we propose a method to combine a linearly and radially acquired OCT volume to generate a single compound volume, which merges the advantages of both scanning patterns to increase the information that can be gained from the three-dimensional OCT data. We initially generate 3D point clouds of the linearly and radially acquired OCT volumes and use an Iterative Closest Point (ICP) variant to register both volumes. After registration, the compound volume is created by selectively exploiting linear and radial scanning data, depending on the A-scan density of the individual scans. Fusing regions from both volumes with respect to their local A-scan sampling density, we achieve improved overall anatomical OCT information in a high-resolution compound volume. We demonstrate our method on linear and radial OCT volumes for the visualization and analysis of macular holes and the surrounding anatomical structures.

Anatomical and functional outcomes of pneumatic vitreolysis for treatment of vitreomacular traction with and without macular holes.

PURPOSE: To evaluate the outcome of pneumatic vitreolysis (PVL) for vitreomacular traction (VMT) with or without full thickness macular hole (MH) < 400 µm. METHODS: Forty-seven eyes of 47 patients were included who had undergone PVL for VMT with or without MH. Main outcome measures were release of VMT, MH closure, best-corrected visual acuity (BCVA) and adverse events. RESULTS: Thirty-three patients had isolated VMT and 14 patients VMT with a MH. Four weeks after PVL, the overall VMT release rate was 35/47 (74.5%): 25/37 (67.6%) in phakic and 10/10 (100%) in pseudophakic eyes (p = 0.03). Four of 14 MH (28.6%) were closed. Twenty-two of 47 (46.8%) eyes required a subsequent PPV: 12/33 (36.4%) in the VMT only group and 10/14 (71.4%) in the VMT with MH group. Mean BCVA improved from 0.48 (± 0.24) to 0.34 (± 0.23) logMAR at 6 months in patients with VMT alone (p < 0.001), and from 0.57 (± 0.27) to 0.41 (± 0.28) logMAR in patients with VMT and MH (p = 0.008). Adverse events included new formation of a large MH in 4/33 (12.1%) eyes, failure of MH closure in 10/14 (71.4%) eyes, progression of mean minimum linear diameter (MLD) MH size from baseline 139 (± 67) to 396 (± 130) µm (p < 0.001) and development of a retinal detachment in 4/47 (8.5%) eyes. CONCLUSION: While PVL leads to a high VMT release rate particularly in pseudophakic eyes, it is associated with a relatively high incidence of MH formation, MH size progression and retinal detachment.

Defining a Cutoff for Progression of Macular Holes.

Purpose: The purpose of this study was to determine a cutoff for progression of idiopathic full-thickness macular hole (MH) size. Methods: Retrospective analysis of consecutive patients waiting 4 weeks for MH surgery. Two observers performed 3 repeat sets of MH size measurements on optical coherence tomography (OCT) high-density radial scans taken at first presentation and 4 weeks later before surgery. Primary outcome was the definition of a cutoff for true enlargement of MH size versus measurement error. Secondary outcomes were risk factors for change in minimum linear diameter (MLD) size and best-corrected visual acuity (BCVA). Results: Fifty-one patients were included with a mean MH size of 334 µm (±179 µm; range 39 to 793 µm). The cutoff for an increase in MLD size calculated as the outer confidence limit for the 99.73% limits of agreement was 31 µm. This was independent of MH size. Using this cutoff, MLD size increased in 9/34 (26.5%) of patients without and in 14 of 17 (82.4%) of patients with vitreomacular traction (VMT; P < 0.001). Mean BCVA deteriorated in patients in whom the MH had progressed from 0.62 (±0.23) logMAR to 0.82 (±0.29; P < 0.001), whereas there was no significant change in BCVA in patients without MH progression (P = 0.25). In 31% (16/51) of patients, classification of their MHs (small ≤250 µm, medium 251-400 µm, and large >400 µm) changed over the 4-week period. Conclusions: Using a cutoff discriminates change from measurement error. A significant proportion of MHs progressed by 4 weeks, particularly in the presence of VMT. Translational Relevance: The established cutoff enables clinicians to differentiate true MH enlargement from measurement error.

Surgical Studies of Reconstructive Breast Surgery - An Overview of the Topics at the 2019 Annual Meeting of the Working Group for Reconstructive Surgery in Oncology-Gynecology.

This year's annual AWOgyn meeting focused on studies of reconstructive breast surgery. As the majority of breast reconstructions are implant-based, most studies also focused on implant-based reconstruction. Since 2011, the guidelines have recommended using interposed mesh materials as support. The basic idea behind every type of material is to provide coverage and stabilization for the implant by constructing an "internal bra" which will create the appropriate implant shape and maintain the position, stability and flexibility of the implant. The Working Group for Reconstructive Surgery in Oncology-Gynecology (AWOgyn) has undertaken to analyze different materials with regard to indications, success rates and side effects as documented in registers, clinical assessments and study protocols. This has increased application safety and is expected to improve it even further in future. Prospective studies are being carried out to investigate issues such as the optimal material, optimal implant site and best cosmetic results. The first results for porcine and human acellular matrices and for partially resorbable titanium-coated synthetic polypropylene meshes are now available. In 2019, the AWOgyn working group will be launching further studies to evaluate a perforated acellular dermal matrix (Fortiva ® ), a titanium-coated implant pocket (TiLOOP ® Bra Pocket) and a fully resorbable synthetic mesh (TIGR ® mesh).